![]() Follow the above steps to create two additional virtual IPs.l Set External Service Port to 8080 -8080. Configure the fields in the Port Forwarding For example:.l Set Mapped IP Address/Range to 172.16.200.55. Set External IP Address/Range to 1.100.199.Configure the fields in the Network For example:.To create a virtual IP with port forwarding using the GUI: This allows remote connections to communicate with a server behind the firewall. We map TCP ports 8080, 8081, and 8082 to different internal WebServers’ TCP port 80. This example has one public external IP address. This recipe shows how to use virtual IPs to configure port forwarding on a FortiGate unit. If you need to hide the internal server port number or need to map several internal servers to the same public IP address, enable port-forwarding for Virtual IP. To create a virtual IP with services using the CLI:Ĭonfig firewall vip edit “WebServer_VIP_Services” set service “TCP_8080” “TCP_8081” “TCP_8082” set extip 10.1.100.199 set extintf “any” set portforward enable set mappedip “172.16.200.55” set mappedport 80 Apply the above virtual IP to the Firewall policy.In the Services pane, select TCP_8080, TCP_8081, and TCP_8082.In the Services field, click + to display the Services pane.Enable Optional Filters and then enable Services.Set Mapped IP Address/Range to 16.200.55.Configure the fields in the Network For example: l Set Interface to any.To create a virtual IP with services using the GUI: We map TCP ports 8080, 8081, and 8082 to an internal WebServer TCP port 80. This recipe shows how to use virtual IP with services enabled. This mode allows users to define services to a single port number mapping. Virtual IP with services is a more flexible virtual IP mode. Set dstaddr “Internal_WebServer” set action accept set schedule “always” set service “ALL” set nat enable Set srcintf “wan2” set dstintf “wan1” set srcaddr “all” To apply a virtual IP to policy using the CLI:Ĭonfig firewall policy edit 8 set name “Example_Virtual_IP_in_Policy” Enter a unique name for the virtual IP and fill in the other fields.Ĭonfig firewall vip edit “Internal_WebServer” set extip 10.1.100.199 set extintf “any” set mappedip “172.16.200.55”.l If traffic goes from an IPv6 network to an IPv4 network, select NAT64. ![]() l If traffic goes from an IPv4 network to an IPv6 network, select NAT46. l If IPv6 is on both sides of the FortiGate unit, select IPv6. l If IPv4 is on both sides of the FortiGate unit, select IPv4. Select the VIP Type depending on the IP version network on the FortiGate’s external interface and internal interface.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |